M-1010 antenna amplifier
Product serial number
A UHF active wireless directional antenna with dual-polarization logarithmic periodic array. Compared with 1/2-wavelength omnidirectional antennas, the cardioid pickup pattern can more effectively receive signals in a predetermined coverage area, and more effectively cover radio frequency signals outside the area.
To compensate for the signal loss of the coaxial cable, the on-board amplifier provides the user with a selectable 3 or 10 dB gain. The gain setting is displayed by two LED lights. The antenna amplifier is powered by a remote 12V DC power supply and is provided by the antenna distribution system through a coaxial cable. It can be mounted on a microphone stand, hung on the ceiling or mounted on the wall using a rotating adapter bracket. It can resist the influence of bad weather and is suitable for outdoor use. Use two antennas to get the best diversity performance.
Frequency range: 450-970MHz
Connector type: BNC, jack
Impedance: 50 Ω
Power requirements: 10 to 15 VDC offset from coaxial connection, 75 mA
Receiving mode (3 dB beam width): 70 angle
Third-order overload intercept point (OIP3): >30 dBm
Antenna gain (on axis): 7.5 dBi
Signal gain: ±1 dB
Switchable Active: +12 dB, +6 dB, Passive: 0 dB, -6 dB
RF signal is too strong indicator threshold: -5 dBm
We could not find any corresponding parameters, please add them to the properties table